







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Corte Madera
If you live in Corte Madera and your fence is leaning, sagging, or just not keeping the neighbors’ view out, we can help. We install wood, vinyl, aluminum, and chain link fences throughout town, from the marsh-side flats near the Corte Madera Marsh to the sloped lots around Christmas Tree Hill. Fence work here isn’t the same as it is in Mill Valley or Tiburon, and we plan every job with that in mind. Call (844) 684-1772 to schedule your free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Corte Madera Homeowners Call Construction Vallejo for Fence Installation

Corte Madera sits on bayfill and former marshland, and that shapes how a fence has to be built here. Posts that look fine in July can shift and rack by January, once winter groundwater rises in the marsh-side flats. We plan footing depth, drainage, and wind-load-rated connections around that reality instead of treating it as a surprise later.
We’re a single-source contractor, so fence work often comes alongside a bigger project on the same property – a paver driveway, a deck, a home addition – and you’re dealing with one relationship rather than a handoff to an unknown sub for each trade. Our technicians have up to 15 years of experience, and we specify materials from brands we trust rather than whatever’s cheapest that week. Estimates are free and written line-item, so you can see exactly where the money goes before anything is ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Corte Madera
Wood Fence Installation in Corte Madera
Wood remains a favorite for privacy on the older ranchers and split-levels around town, especially where homeowners want the fence to match an existing style. On marsh-side lots we set posts deeper and use corrosion-resistant hardware, because damp air off Richardson Bay eats through cheap fasteners faster than most people expect. A wood privacy fence is also the most common candidate for the leaning-panel problem we see after a wet winter.
Vinyl Fence Installation in Corte Madera
Vinyl holds up well in Corte Madera‘s damp winters and dry summers, and it doesn’t need refinishing. We work with quality vinyl lines, including Bufftech, and match panel style to the lot – taller privacy panels on the marsh side, shorter picket styles near Town Center where the goal is boundary definition rather than screening. A typical vinyl fence in Corte Madera runs $3,500 – $9,000, depending on length, height, and gate count.
Aluminum Fence Installation in Corte Madera
Aluminum is the right call where you want a clean boundary without closing off a view. It performs well in the salt-influenced air near the bay, and we specify powder-coated systems from makers like Jerith so the finish holds. Aluminum fence installation in Corte Madera usually runs $4,000 – $10,000, with post embedment and wind-load-rated spacing factored into the quote.
Chain Link Fence Installation in Corte Madera
Chain link stays practical for side yards, dog runs, and property-line work where visibility matters more than looks. We spec corrosion-resistant coatings because bare galvanized steel corrodes quickly in the damp air here. Gates are hung so they don’t sag after the first wet season, which is the most common failure we see on older installations.
Trusted Brands We Service in Corte Madera
We work with fence manufacturers whose products carry documented wind-load ratings you can put in front of an insurer later – Jerith for ornamental aluminum, Bufftech for vinyl, Barrette for gate and fence systems, and ActiveYards across categories. We don’t stock these locally; we specify the right product for your lot and rating requirement, order it, and get it to your property. That gives you a wider choice of styles and ratings than a contractor limited to one catalog. If you’ve researched a specific product, we can tell you whether it fits Corte Madera’s wind-load and corrosion requirements before you buy.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Corte Madera Homes
- Posts set shallow in bay mud and old marsh fill. The panels look level the first year, then rack and lean after the first wet winter, especially on the marsh-side flats and near Town Center. The fix is embedment deep enough to reach past the active fill layer.
- Wind-load-rated spacing skipped to save money. A fence built without rated post spacing and panel connections meets no documented standard, so when a storm damages it, there’s nothing on file to support a claim.
- Cheap hardware corroding in salt-influenced air. Galvanized or bare-steel fasteners and hinges rust fast near Richardson Bay, causing gate sag and fastener failure within a few seasons. We spec corrosion-resistant stainless hardware for that reason.
- Permit and inspection sign-off never documented. A fence built without a permit file and inspection sign-off leaves the homeowner with nothing to show an insurer after storm damage. We pull the permit and document the closeout so the proof exists.
Pricing for Fence Installation in Corte Madera, CA
Here are typical estimated ranges for Corte Madera, so you know roughly where your project lands before you call. The written estimate sets the final price, and it’s free and line-item.

| Service | Typical Estimated Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
What moves the number: total linear feet, fence height, gate count and hardware, post embedment depth given the soils on your lot, and whether the fence needs to meet a higher wind-load rating. A quote that leaves out footing depth, rated spacing, corrosion-resistant hardware, or the permit and inspection step may look cheaper up front, but it’s not the same fence. Call (844) 684-1772 for your free estimate.
We Also Serve Cities Near Corte Madera
We also work in Larkspur, San Rafael, Richmond, and San Pablo. If your property sits just outside Corte Madera, our fence installation team can still help, and the same wind-load and footing planning applies. Call (844) 684-1772 to talk through your project and get a free estimate.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Corte Madera

Your fence needs to meet the wind-load rating required by local code for your specific site, and the product you buy must carry that rating and be installed with rated post spacing and connections to match. We confirm the requirement for your lot before ordering and specify a product that meets it. Call (844) 684-1772 for an exact quote, estimates are free.
On the marsh-side flats near the Corte Madera Marsh, posts are set into bay mud and old marsh fill with a high winter water table, so holes that look dry in July can fill with tidal-influenced groundwater by January. That makes footing and drainage the problem, not just the panel above ground. On hillside lots the challenge is different – slope anchoring and retaining rather than groundwater. Call (844) 684-1772 and we’ll assess your lot.
Most fence installations in Corte Madera require a permit and an inspection sign-off, so plan for it in your quote and your timeline. We pull the permit, confirm the footing detail and wind-load rating, and make sure the inspection is documented in the permit file. Call (844) 684-1772 for a free estimate that includes the permit step.
A compliant quote includes post embedment depth set for your soils, wind-load-rated panel and post spacing, corrosion-resistant fasteners and hardware, and the permit and inspection sign-off. A cheap quote typically skips rated spacing, uses bare galvanized hardware, and leaves the permit to you. Call (844) 684-1772 and we’ll show you what’s included in a line-item estimate, free of charge.
If a windstorm damages your fence, an insurer may ask for proof it met code, and a documented permit file with inspection sign-off is what supports that claim. A fence with no rating and no permit file gives you nothing to show. We document the compliance so the proof exists. Call (844) 684-1772 to schedule your free estimate.
Ready to get a fence that holds up to Corte Madera’s winters and meets the rating your insurer will ask about? Call (844) 684-1772 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Vallejo.












